Welcome to the new Global i-PRO website! Choose your country/region under the Global dropdown!

PoE Injector

WJ-PU201 i-PRO

60W Single Port Power over Ethernet

PoE injector compliant with industry standards

  • Compliant with IEEE802.3bt Standard
  • Limited Power Source
  • Compliant with Phihong Proprietary 12.5K Detection
  • Single Source 4 Pair Power Current Sharing
  • Non-Vented Case
  • Broken Wire Detection
  • 4 Pair Powering +3,6,4,5 / - 1,2,7,8
  • Gigabit Compatible
  • Full Protection OVP, OCP
  1. Compliant with industry standards
    IEEE802.3bt/at/af
     
  2. PoE power supply capabilities up to 60W with RJ45 models
     
  3. Installation improvement
    A single cable to supply power and data. 100 to 240 V electrical installation qualifications is not required.
COMPONENT SPECIFICATION
Safety UL (UL62368-1), c-UL (CSA C22.2 No.62368-1), CE, IEC62368-1
Power source 100 to 240 V AC (50 Hz/60 Hz)
AC Input Current 2.0 A (RMS) max for 90 V AC
1.2 A (RMS) max for 240 V AC
Output power consumption 56 V DC: Approx. 1.07A / 60 W
(Combined output on data pairs and spare pairs.)
Ambient operating temperature 60 W output: –10 °C to +40 °C {14 °F to 104 °F}
30 W output: –10 °C to +50 °C {14 °F to 122 °F}
Ambient operating humidity 10 % to 90 % (no condensation)
Storage temperature –20 °C to +65 °C {–4 °F to +149 °F}
Storage humidity 10 % to 90 % (no condensation)
Dimension 65 mm (W) × 36 mm (H) × 163 mm (D) {2-9/16 inches (W) × 1-13/32 inches (H) × 6-13/32inches (D)} (excluding cord and plug)
Mass Approx. 300 g {0.66 lbs}
Network I/F 10BASE-T/100BASE-TX/1000BASE-T, RJ45 connector (×2)
Compliant with IEEE802.3bt/at/af Standard
LED Indicator LED indicator (×1)
Standard Accessories Operating Instructions
Power cord (A type) 1pc.

No data

Close