Welcome to the new European i-PRO website! Choose your country/region under the Europe dropdown menu!

Coaxial - Lan Converter

WJ-PC200 i-PRO

Coaxial - LAN Converter

Camera side unit

Easy migration from analog to IP system with existing coaxial cable *Indoor use only

The coaxial - LAN converter can be used for distances of up to 300 m (984 feet) for PoE+ connections and 500 m (1,640 feet) for PoE connections, and 2.0 km (6,560 feet) for non-PoE+ connections. (When used with RG-6/U coaxial cable, and the loop resistance is below 4 Ω/100 m {328 feet} without additional joint parts.)

Two models are provided on the receiver side

WJ-PR204 - 4-channel
WJ-PR201 - 1-channel

Camera side


Up to 4 network cameras can be connected and used on a single receiver side unit.(WJ-PR204) and are Power over Ethernet Plus (PoE+) ready.
The coaxial - LAN converter is compliant with PoE+ standards (IEEE802.3at) and PoE+ cameras can be connected and used*1.

High-speed transmission

The coaxial - LAN converter is capable of transmission speeds of 35 Mbps or over for TCP*2, and 45 Mbps or over for UDP connections*2.
(When used with RG-6/U coaxial cable, and for distances under 2.0 km (6,560 feet) [PR201], 500 m (1,640 feet) [PR204]

No setup required

Connections can be established by simply connecting the coaxial cable to the coaxial - LAN converter.


*1 There are limitations on the combinations of the cameras to be connected, the type of power supply and transmission range to the receiver side units.
For more detail please see the operating instructions on our website

*2 Transmission speed is the speed of transmission between the receiver side unit and the camera side unit.
Values may vary depending on the condition of the coaxial cable (for example, as the cable deteriorates over time), network conditions, etc.

Operating Environment Temperature : -10 to 50 °C {+14 °F to +122 °F}
Humidity : 10 % to 90 % (without condensation)
Interfaces 10Base-T/100Base-TX x 1
BNC connector x 1
Dimensions (W x D x H) Main Body : 76 mm x 76 mm x 36 mm {3 inches x 3 inches x 1-7/16 inches}
When a BNC connector cover is mounted : 76 mm x 156 mm x 36 mm {3 inches x 6-5/32 inches x 1-7/16 inches}
Mass (Approx.) 110 g (0.24 lbs)
Power Supply Original power system
(from the receiver side unit via the coaxial cable
Finish Main unit : PC/ABS Sail white
BNC connector cover (1 ch) : ABS White

No data